Overview
This CFD tutorial demonstrates how to perform gas mixing simulation and species transport analysis inside a tank using MIDAS NFX CFD. The simulation examines the mixing behavior of ammonia (NH₃) and carbon dioxide (CO₂) inside a tank initially filled with air. The inlet velocities are set to 5 m/s for NH₃ and 2 m/s for CO₂, with an outlet gauge pressure of 0 Pa.
CFD Gas Mixing and Species Transport Analysis
• Gas Mixture and Material Properties
Fluid materials, gas mixture properties, and initial species mass fractions are defined to represent the initial gas composition and mixing conditions inside the tank.
• 3D Mesh Generation and CFD Boundary Conditions
A 3D mesh is generated for the internal fluid domain. Inlet, outlet, and wall boundary conditions are applied, with specific species mass fractions assigned to each inlet.
• Transient CFD Analysis Using Species Advection
Transient CFD analysis with Species Advection is performed to investigate how gas composition and species distributions change over time. The air mass fraction is monitored at an outlet node to evaluate the gas mixing process.
• CFD Post-Processing and Flow Visualization
Velocity contours, vectors, and streamlines are displayed to examine internal flow patterns. Species mass fraction animations visualize how each gas is distributed throughout the tank over time.
The video demonstrates how computational fluid dynamics (CFD) can be used to analyze gas mixing behavior, species transport, and mass fraction distributions, highlighting the influence of internal flow circulation on the gas mixing process.