Meshfree

[Online] MeshFree_MeshFree Contact Condition Comparison : Welded, Sliding & General

Overview

This video compares three contact conditions in MeshFree—Welded, Sliding, and General—to examine how different contact behaviors affect load transfer and von Mises stress distributions. The analysis uses a Hitch Assembly model with identical geometry, material properties, loading, and boundary conditions, changing only the contact conditions.

MeshFree Contact Condition Analysis

• Welded Contact
Welded Contact restricts both separation and sliding between contact surfaces, causing the connected parts to behave as a single body. The results show stress concentration near the boundary where the bonded contact region ends.

• Sliding Contact
Sliding Contact prevents separation while allowing relative sliding along the contact surfaces. The results show stress concentration around the bolt area and a relatively wide stress distribution within the cylindrical contact region.

• General Contact
General Contact allows sliding, separation, and recontact between contact surfaces. The results show localized stress concentrations in regions where contact is maintained and loads are transferred. MeshFree can also consider certain nonlinear contact behaviors through General Contact in Linear Static Analysis.

The video demonstrates how Welded, Sliding, and General Contact produce different load transfer paths and von Mises stress distributions under identical analysis conditions, highlighting the importance of selecting contact conditions that represent the actual structural connections.
Download Example Files

.....

Engineering confidence starts here.

Run your first analysis – free for 14 days

Start Free Trial